@nutzich Currently when you put in FF-FF-FF-FF-FF-FF into the MAC address list, you will get an error showing "Invalid MAC Address". It seems that the placeholder for "all MAC-Address is not possible?

@Ken73 The VLAN is based on the 802.1Q VLAN, to achieve network isolation, but currently the controller cannot set up the PVID, so in fact this option is not useful at this moment. The Interface can...

@akp55 On the controller there has the SSH option. If you use an SSH terminal to manage devices that are managed by the controller, you can only get the User privilege.

@AleXSR700 Put in the US firmware version into the EU hardware may get the error "invalid file", there has a preset limit for the firmware of different versions. And it is also against the...

@JohnWhited Can you see the WAN 1 option before you reset and reconfigure? Also what is the firmware version of this router？ If not the latest one try to upgrade it. Reset again, use another browser...

@PaddyBoyFloyd 1. If you are sure that the EAP's firmware is compatible with the v4 Controller, then you can try to Ping the EAP's IP address on the PC with the software installed. If the PC can Ping...