Model :

Hardware Version :

Firmware Version :

ISP :


Hi everyone, I tell you that I always use the TP-LINK routers but I never leave them with the factory firmware because sometimes
it is complicated for me to configure them and they do not go well in specific cases like bridge mode or other cases.
I always change the firmware to a free one like dd-wrt almost never use open-wrt, the issue is that I bricked two routers one is the
mentioned in the title, went wrong the flash. I saw that it could be recovered by serial console but I did not understand much the
issue is that it occurred to me to buy a memory programmer SPI to download the firmware of dd-wrt and record the firmware in memory
probe thousands of times with different firmwares including the original, I spent a lot of time researching until I discovered that
the firmwares do not bring the built-in bootloader, so when I program everything with the memory programmer I overwritten everything,
even the bootloader part. I need your help and if someone can come from the original firmware for this router to record it with the SPI
programmer but have broken a router more. Sorry but my english is not good and I have to use google translate

Thank you very much to all