Deco M4/S4_V2 Support Connection Preference

2024-04-23 02:09:20

Posts: 120

Helpful: 2

Solutions: 2

Stories: 8

Registered: 2022-12-07

Deco M4/S4_V2 Support Connection Preference

2024-04-23 02:09:20

Model: Deco M4 Deco S4

Hardware Version:

Firmware Version:

This Article applied to

Deco M4_V2_1.5.8
Deco S4_V2_1.5.1

Deco M4_V2	Deco M4_V2_1.7.0 ( New version updated on 2024.3.7)
Deco S4_V2	Deco S4_V2_1.6.1_build_20240328 (updated on 2024.4.19)

1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.

2. For Deco M4_V2, the firmware downgrade(back to the official 1.5.8 version) needs to be implemented via firmware recovery.

3. For Deco S4_V2, it would revert to the official 1.5.1 directly via web UI.

Deco M4_V2_1.7.0	Support for customizing Satellite Deco signal source. Support for customizing Client connection preferences. Support for Reboot Schedule. Support for NO-IP and DynDNS. Support for setting Effective Time and Bandwidth Limit for guest network. Added Smart DHCP switch under Access Point mode. Add Static Route. Add the ability to customize the MTU. Add IoT network.
Deco S4_V2_1.5.1	Support for customizing Satellite Deco signal source.

Please feel free to comment below if you have any issues with these two firmware versions!