Home Network Community > Wi-Fi Routers > Archer C6 WDS bridge stops working after few days
< Wi-Fi Routers

Archer C6 WDS bridge stops working after few days

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C6 WDS bridge stops working after few days

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C6 WDS bridge stops working after few days
Archer C6 WDS bridge stops working after few days
2021-02-26 02:02:45
Model: Archer C6  
Hardware Version: V3
Firmware Version:

I have set up a WDS bride using Archer C6 v3.2 and it works fine for a while. After about a day or so, it stops and keeps waiting for IP address. 

Restarting the device doesn't help. If I go back to the settings for WDS and select the same network again and save, it starts working.

Is there any workaround? Is there any firmware update that will help fix this issue?

I can't find any firmware for hardware V3.2  on the tp-link site.

  0      
 
  0      
 
#1
Options
2 Reply
Re:Archer C6 WDS bridge stops working after few days
2021-02-26 03:01:38

@mohank 

 

Have you set static wireless channel on the main router, when setting up the WDS ?

If wireless channel is set to Auto, when the main router changes the channel (due to interference, reboot, etc.), the WDS won't be established, until you manually point the main router SSID in the extended router.

  0  
  0  
#2
Options
Re:Archer C6 WDS bridge stops working after few days
2021-03-05 04:37:41

@Ivaylo 

Let me check and change it to static channel.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 6

Replies: 0

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.