@Ivaylo 

 

my root jiofi info

 

 

i change c6 subnet same as root jiofi

 

 

i connect to root router jiofi on WDS

 

 

on status it says WDS RUNNING

 

 

i disable DHCP on c6 and restart the router

 

but not working

i'm not gettting internet

For you own protection, when you posting screenshots remove/blur/cover any personal passwords.

What's the LAN IP address of the modem ? Is it 192.168.225.1 ? (Gateway IP in your creenshot /modem/)

If the C6 is with IP address 192.168.0.37, that means the modem should be in 192.168.0.0/24 network as well.

Try to set static wireless channel in the modem - for ex. 5 (Automatic channel selection is enabled on your screenshot /modem/).

Set 20MHz channel width for 2.4 band in C6 (it is Auto in your screenshot /C6/).

@Ivaylo 

 

C6 ip is 192.168.0.37

 

root router ip is 192.168.225.1

 

You can check on the screenshot

Well, root router should have something like 192.168.0.1/255.255.255.0 as IP address/Mask, to be in the same subnet with the C6 router.

Remember that it was note #1 in the guide for configuring WDS I've sent.

@Ivaylo 

my root router cannot change the ip and subnet

 

its fix ip and subnet

you can check screenshot

 

i access root router admin panel by that ip 192.168.225.1

Then you'll have to change the C6 LAN settings to meet the WDS requirements. Does that router have a DHCP server ? If yes, what's the IP address range that it is configured with ?

@Ivaylo 

Yes root router also has DHCP

 

but there is no option to check DHCP ip on the panel

Sorry, but I am not familiar with this type of devices. If that's the case how one could tell what's the IP address range that this router gives to the devices connected to itself ?

For example, if you connect your laptop to the root router via wireless, what's your laptop IP address then ?