[Solution]Manual Band Selection for 4G WiFi Routers

If you have experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection, Please download and install the following beta firmware the router to manually fix the band.
Archer MR600(EU)_V1:
Note: Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.
Archer MR200(EU)_V3/V4, Archer MR400(EU)_V2/V3, TL-MR6400(EU)_V3/V4, TL-MR150(EU)_V1:
Archer MR400(EU)_V4:
TL-MR6400(APAC)_V3:
TL-MR6400(EU)_V5:
Archer MR200(EU)_V5:
TL-MR150(EU)_V2:
*The official firmware has been released for the below models, you can install the latest firmware via the online upgrade or download it from the official website:
Archer MR600(EU)_V2_200909 and later versions
TL-MR6500v(EU)_V1_200924 and later versions
If you are not sure about how to select the band manually on the router web interface, check the instructions below:
How to select 4G band manually on the web interface of LTE Gateway Routers?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi can i used
TL-ANT2414A
2.4GHz 14dBi Outdoor Directional Antenna
to get a good internet speed.
Please advice.
thanks
- Copy Link
- Report Inappropriate Content
Kindly provide Archer MR200 V2 latest beta firmware for band selection.
- Copy Link
- Report Inappropriate Content
When can I expect band selection in the normal firmware for the MR600v1?
- Copy Link
- Report Inappropriate Content
I have an MR200 with these details:
Hardware version: Archer MR200 v5 00000001
Firmware version: 1.2.0 0.9.1 v0001.0 Build 210120 Rel.67320n
I'm trying to install the beta firmware from this link
Archer MR200(EU)_V5:
But I'm running into this issue
Is there another version for MR200?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@vigneshs Beta version worked for me (tested again after your messages). Check with different browser to download file and upload to router, may be corruption in transfer process.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Please add the firmware LTE band lock option for MR200 V2.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Please add the firmware LTE band lock option for MR200 V2.
- Copy Link
- Report Inappropriate Content

Information
Helpful: 0
Views: 224
Replies: 0
Voters 1
