Lets Down vote all their product on e-commence website, Tell people TP-Link is worst. TP-Link does not provide support and aftrsale service is really bad. 

THIS is the problem:

"Codice Open Source (GPL)

I prodotti TP-LINK contengono software sviluppato da terze parti, incluso software distribuito con licenza GPL (GNU General Public Licence versione 1, 2 o 3) o con licenza LGPL (GNU Lesser General Public License): l'utilizzo di questo software è possibile entro limiti e condizioni stabiliti dalla tipologia di licenza con la quale è distribuito e specificate a questo link. È possibile ottenere il codice sorgente soggetto a GPL e la lista dei prodotti che utilizzano tale codice all'interno del Centro sorgenti GPL.

I relativi software sono distribuiti con formula di TOTALE ESCLUSIONE DI GARANZIA; non sono pertanto garantite COMMERCIABILITÀ e/o IDONEITÀ PER QUALSIASI UTILIZZO SPECIFICO."

"Codice Open Source (GPL)

TP-Link products contain software developed by third parties, including software distributed with GPL license (GNU General Public License version 1, 2 or 3) or with LGPL license (GNU Lesser General Public License): the use of this software is possible Within limits and conditions established by the type of license with which it is distributed and specified at this link. You can get the source code subject to GPL and the list of products that use this code within the GPL source center. The relative software are distributed with a total guarantee exclusion formula; They are therefore not guaranteed marketability and / or suitability for any specific use."

@darant Hi I'm new to the banding fun but im on Vodafone using the MR600 I'm planning on installing the V2 firmware on my V1 but I'm at a loss to which bands are which, can you help in any way please.

Also is there a newer version out now to do this?

Thanks

@mr100user They are not always bad but you get zero to no support every once in a while.

@Satheskumar 

Rahul_101

HI, the beta firmware that added band selection for Archer MR600 V1:

https://static.tp-link.com/2020/202012/20201207/Archer_MR600v1_1.1.0_0.9.1_[201204-rel66940]_up_boot_2020-12-04_19.05.35.zip

and the official firmware for Archer MR600 V2 is already released:

https://www.tp-link.com/en/support/download/archer-mr600/v2/#Firmware

@badbackbilly, the firmware of V2 could not be installed on the V1;

As for the official firmware for V1 to support band selection, I am sorry that there is no ETA yet and please keep attention to the official website;

PS: since this thread is long enough, the beta firmware has been posted at the beginning of the thread;

If you have some other issues, it is recommended to start a new thread or leave me a private message for notice:

Thank you.

@TP-Link 

The first firmware was released slowly 2 years ago, the latest 10 months ago. It takes a very long time to release normal firmware. To sell the device is impossible, fame went to an electronic waste throughout. No one needs it, only the one who bought it in the beginning suffers with me.

I would prefer to catch and return even if the manufacturing company only reimbursed 3/4 of the purchase price.

when will be NOT BETA, cause these waterlogo really #$%^&*....

@darant 

Hi. On V2 hardware is it possible to manually select 4g bands? i want to buy this router and i'd like to know  if version 2 support this feature

darant wrote

Hi all,

 

Following the long thread on the same subject discssing the BETA FW, as I said I would, TPLink have given me permission to share the FW download llink.

 

From TPLink - We recently released a beta firmware for Archer MR600(EU) V1 which can allow us to select 4G+bands for Archer MR600 manually.

https://static.tp-link.com/2020/202004/20200420/Archer_MR600v1_1.1.0_0.9.1_[200417-rel75138]_up_boot_2020-04-20_08.44.31.zip

For Archer MR600, if you want to use its 4G+network, your SIM card should support the CA bands group Archer MR400 supports. Please check the attached picture and check if your SIM card supports the band groups on the list or not.

 

They asked me to state that, this BETA FW is for the Archer MR600(EU) V1 ONLY!

 

Neither TPLink nor me take any respnsbility if you flash a none-EU router.

 

. thanks

darant wrote

Hi all,

 

Following the long thread on the same subject discssing the BETA FW, as I said I would, TPLink have given me permission to share the FW download llink.

 

From TPLink - We recently released a beta firmware for Archer MR600(EU) V1 which can allow us to select 4G+bands for Archer MR600 manually.

https://static.tp-link.com/2020/202004/20200420/Archer_MR600v1_1.1.0_0.9.1_[200417-rel75138]_up_boot_2020-04-20_08.44.31.zip

For Archer MR600, if you want to use its 4G+network, your SIM card should support the CA bands group Archer MR400 supports. Please check the attached picture and check if your SIM card supports the band groups on the list or not.

 

They asked me to state that, this BETA FW is for the Archer MR600(EU) V1 ONLY!

 

Neither TPLink nor me take any respnsbility if you flash a none-EU router.

 

@hawk82 

I would not buy this router, I would look for an alternative. Since to select the band you will have to enter a beta and lose functionalities.