Home Network Community > 3G/4G Routers/MiFi > 4G MR600 OneMesh + Multiple RE305 Extenders
< 3G/4G Routers/MiFi

4G MR600 OneMesh + Multiple RE305 Extenders

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

4G MR600 OneMesh + Multiple RE305 Extenders

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
4G MR600 OneMesh + Multiple RE305 Extenders
4G MR600 OneMesh + Multiple RE305 Extenders
2020-03-26 22:59:17 - last edited 2021-03-19 08:51:13
Model: Archer MR600  
Hardware Version: V1
Firmware Version: 1.1.0 0.9.1

 

I have a MR600 wifi Router and would like to expand the wifi network with some OneMesh Compatible extenders (RE305 Model), my question is

can these be chained together to extend the signal.  e.g.   Router <> Extender 1 <> Extender 2.   Rather than each extender having a direct wifi connection

to the MR600 Router.

 

PA

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:4G MR600 OneMesh + Multiple RE305 Extenders-Solution
2020-03-27 08:07:49 - last edited 2021-03-19 08:51:13

@ansellp 

 

Hello, they can be chained like Main router ))(( RE 1 ))(( RE2 to build up the mesh network. But actually, with mesh-network enabled, the extender will select the front end device automatically to get better performance. So even though you connect them as daisy-chained, it is possible for the two extenders to connect to the router directly. 

 

Best regards. 

 

Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:4G MR600 OneMesh + Multiple RE305 Extenders
2020-03-27 07:43:11 - last edited 2020-03-27 08:08:06

@ansellp 

 

i did eventually find the answer at the bottom of the OneMesh page. Hopefully anyone searching for the same answer will find this post.

 

Q2: How to set up a mesh network when there are more than two repeaters joining into the network?

A2: Generally we suggest connecting all the repeaters to the router for better performance. Customers can also connect one repeater to another repeater which already gets connected to the router, however we don’t recommend you to add more than two repeaters to one single link chain in consideration of the Wi-Fi quality.

 

  0  
  0  
#2
Options
Re:4G MR600 OneMesh + Multiple RE305 Extenders-Solution
2020-03-27 08:07:49 - last edited 2021-03-19 08:51:13

@ansellp 

 

Hello, they can be chained like Main router ))(( RE 1 ))(( RE2 to build up the mesh network. But actually, with mesh-network enabled, the extender will select the front end device automatically to get better performance. So even though you connect them as daisy-chained, it is possible for the two extenders to connect to the router directly. 

 

Best regards. 

 

Recommended Solution
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 4

Replies: 0

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.