Home Network Community > Range Extenders > TP-LINK RE200 (AC750) connect to the 5.8 network
< Range Extenders

TP-LINK RE200 (AC750) connect to the 5.8 network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-LINK RE200 (AC750) connect to the 5.8 network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-LINK RE200 (AC750) connect to the 5.8 network
TP-LINK RE200 (AC750) connect to the 5.8 network
2020-02-21 17:52:00 - last edited 2020-02-24 15:02:27
Model: RE200  
Hardware Version: V3
Firmware Version: 1.1.0

Hi, recently I bought a tp-link RE200 and I cannot connect it to the 5.8Ghz network of my Technicolor DPC3848VE DOCSIS 3.0 Gateway router.

 

If I connect the repeater only to the 2.4 network it works, but if I also connect it to the 5.8 network or only at 5.8 and not at 2.4 it does not work.

 

In addition, I have a 300Mbs speed service and the repeater only reaches 10Mbs in the 2.4 and 60Mbs network in the 5.0 network, perhaps because of the same problem that I cannot connect to the router's 5.8.

 

Some screenshots:

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:TP-LINK RE200 (AC750) connect to the 5.8 network-Solution
2020-02-24 06:58:43 - last edited 2020-02-24 15:02:27

@Christian_sol 

 

Hello, thanks for your information. 

 

It seems that the 5GHz has connected to the main router but no internet access. We have released a beta firmware which you can install and verify whether it works for you. 

 

Click here to get the download link. 

 

After that, you can test whether the speed becomes faster. 

 

May it help. 

Recommended Solution
  0  
  0  
#2
Options
5 Reply
Re:TP-LINK RE200 (AC750) connect to the 5.8 network-Solution
2020-02-24 06:58:43 - last edited 2020-02-24 15:02:27

@Christian_sol 

 

Hello, thanks for your information. 

 

It seems that the 5GHz has connected to the main router but no internet access. We have released a beta firmware which you can install and verify whether it works for you. 

 

Click here to get the download link. 

 

After that, you can test whether the speed becomes faster. 

 

May it help. 

Recommended Solution
  0  
  0  
#2
Options
Re:TP-LINK RE200 (AC750) connect to the 5.8 network
2020-02-24 15:06:24 - last edited 2020-02-24 17:03:55

@Kevin_Z it worked perfectly, the connection problem is solved. The speed still not reach 300mb, it stay at 100mb. 

  0  
  0  
#3
Options
Re:TP-LINK RE200 (AC750) connect to the 5.8 network
2020-02-26 09:43:25

@Christian_sol 

 

Thanks for your update. Glad to hear that it works well.

 

As for the speed, the RE200 has the 100Mbps ethernet port, the wired speed from it won't be higher than 100Mbps; and the wireless speed depends on the wireless negotiation speed and the environment; Next to the RE200, with your client connected to the main router's wifi, what is the speed you can get then? 

 

You can adjust the location of RE200 to give it a shot. 

 

Good day. 

 

  0  
  0  
#4
Options
Re:TP-LINK RE200 (AC750) connect to the 5.8 network
2020-06-09 03:23:03

@Kevin_Z 

This beta Works for versión 2.0??

  0  
  0  
#5
Options
Re:TP-LINK RE200 (AC750) connect to the 5.8 network
2020-10-06 23:19:28 - last edited 2020-10-06 23:31:41

Hi @Kevin_Z, I faced exactly same problem as @Christian_sol, I applied beta firmware and issue was solved (see screenshot).

Has a GA firmware been released with this issue fixed ?
 

 

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 4

Replies: 0

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.