TP-Link wrote

@Olafmol 

Hi, All!

Currently, we have a beta firmware for Deco M5 which could help satellite Deco to find the best uplink Deco and optimize its signal source.

So the beta firmware might improve the issue Deco is not getting signal source from the nearest Deco

And if anyone with more than three Deco M5, was suffering from this issue and wanted to test the beta firmware, please leave me a private message with the following information:

1.  the network structure about how each Deco is connected;

(if possible, please help us mark their relative distance)

 

PS: the beta firmware would be updated via web UI and could be reverted back to the official firmware.

Thank you very much for your cooperation and wait for your reply.

 

Update:

Hi, Thank you for all your concerns.

We have the beta firmware for the following models which added a new network optimization feature and can help to optimize the network map of the Deco system.:

Deco M5, Deco M9 Plus, and Deco X60;

Please feel free to send me a private message if you want to test the beta firmware;

Thanks a lot and wait for your reply.

Hello, i'm having this exactley problmem. I bought the starter box with 3 decos m5, and realized I would need one more to cover my house. This foirth one , don't know why, "insists" on selecting the main deco as the signal source... which is very odd, because ir is the one that is farest of it. Well, I'd like to try this beta firmware an see if solves my problem.  @TP-Link 

@TP-Lik please could I be invited to the beta, I (believe) have PM'd you my details, my "issue" thread is here

As per the below, the M5 loft is connecting to the living room, despite an M9 being one floor below.

This is sad, so sad, after all these YEARS we still have basic problems with these mesh routing.

Because of this problems i try it to make my main mesh to be in the middle so all 2(secondary mesh) to have strong signal.

Now all my devices from the house(5) are connected to my main mesh. 

It does not connect to the secondary mesh even if is are 1 meter away.

This is start to be a joke. An expensive joke.

Nothing works properly.

The best advice I can give you is to buy a normal router.

@TP-Link how can i opt in on the beta? Not being able to pick source is super frustrating, I'm getting horrible results with my M9 plus!!!

@TP-Link 

Is there a way to get access to the beta firmware. I have moved my deco m5s around and they're still connecting to the name

@Clivelm See post # 191

@TP-Link after trying this new firmware and seeing how ineffective it was to resolve this matter, I ended up selling my 3rd node and relying on only 2 moving forward.  There's no point to have anything above 2 if I cant get a real mesh network with 3. Good job tp link....

Thanks to @Esker pointing out the post with the links on, I've now uploaded the beta firmware on to two of my M5's and one M9. 

Just waiting for a period where I am able to reboot them all, as the Network optimization appears to be doing nothing for me :-( 

Rebooted all deco's and now mine are connected to units much closer then the primary! Finally 😃