Previously I could access both of my WAN admin pages at 192.168.2.2 and 192.168.2.3, but now only 2.2 (Wan 1) is accessible and the other is comes back as Destination host unreachable when doing ping

Model : TL-ER5120 Hardware Version : V4 Firmware Version : 4.0.2 Build 20200313 Rel.52726 ISP : Multiple The router is set up to use 3 WAN connections, each Wan goes to a DSL or 4G Modem router prior

Hello, Just picked up the switch yesterday, and got it configured/set up during the day. It seems, however, that when my PC powered down the switch also shut itself off. My PC uses a Mellanox ConnectX

Hello, after looking at many switches because there was no network in a factory, I could see that ports 18 to 24 were failing in that switch, as if that module had failed. 1 to 17 works fine. Have you

My setup for router is: Port 1: WAN 1 Port 2: WAN 2 Port 3: LAN 1 Port 4: LAN 2 Port 5: LAN 3 WANs are confugired as failover, WAN 1 being primary. All LANs are connected by a WiFi router with separat

Hello Everyone! ... I have a Synology NAS (DS1520+) and am doing ling aggregation using 802.3ad, so four of my 1GB ports are now bonded together. I purchased the TL-SG108E and am having a hard time co