This article applies to OC200, OC300 In a few cases, Omada Hardware Controller may become bricked during the firmware upgrade. The most common cause is an unpredictable power failure. This article wil

I had the software controller V4.1.5 and updated it to 4.4.3 like stated in the included manual. (backup, complete wipe and reinstall) After importing the backup file in the new version, I can't get t

Hello together I have the following problem: I have a test environment which are all in the same VLAN (physical server which is connected to port 22). All test servers are virtualized via Hyper-V. The

Running OC200 controller with a release 1 prior to latest (had issues where latest would not let me assign static IP's to devices.) I have my environment up and running with TL-R605 as router, 24 port

So far, I have used the gateway in a standalone mode. With controller 4.4.3, it is possible to change the LAN subnet so I thought that adopting the gateway should be ok now, but I'm getting "username

First I had issue with my router (Archer C6 v2), in access point mode, showing orange led and partly loosing internet. It is connected to an easy smart switch that is connected to the R605. So I went