@Zontir So you have two independent Internet sources - Tenda and Arris both working as routers (NAT enabled) and you don't have admin access to them ? Have you tried to configure Archer C7 in AP mode...

@Zontir What your Tenda N301 is used for ? I would configure Arris SBG6580 in bridge mode:...

@Tibarn0wned The VLAN setting in question is here: When Enable IPTV is unchecked there shouldn't be any VLAN configured on your C2300. Check with your ISP if the Internet connection of your C2300 is...

@Ianeon If you have a Synology Diskstation then except the default FTP - TCP port 21, you'll have to open also TCP ports from 55536 to 55599 for Passive FTP. Then you'll be able to access your...

@Guy88 In general the VR600 should be connected to the AX1800 with one of it's LAN ports (but not LAN4) in wireless router operation mode. Your address scheme is correct - the IP address of the VR600...

@zageng Go through your device user guide - Chater 9 Parental Controls - there's an example which will put some light on your request. Parental control is for restricting the access to a particular...