@MagNeto If your router is working as it should then that's normal. Sometimes to lower the working temperature if device behaves abnormal, I've seen a suggestions to lower the wireless radio...

@EnzoConqueror In the posted scenario - Case 2 the device is still in router mode, hence all its features are available, though I am not sure if WDS setup will work in conjunction with OneMesh....

@Ianeon As I posted in my first post, for accessing FTP server from outside your network, the following ports have to be opened on the VR2100: For Passive FTP - these are FTP data ports. Replace the...

@EnzoConqueror If your load balancer is the main NAT / DHCP server device, then to avoid the double NAT, you can use the following scenario - Case 2. In this scenario you use a LAN port (not the WAN...

@EnzoConqueror Nice diagram. Yes, the speed would be halved between the two wi-fi routers. Keep in mind that if WDS is built over 5Ghz band the usable distance between the routers would be shorter...

@Ianeon Is that the model of your device ? If that's correct, I see you're with the latest FW. Are you using the Archer VR2100 in DSL modem/router mode or Wireless Router mode - are you trying to...