@Martin_Vitek Follow this guide to determine your router's IP address while you're connected to your router by wire or wirelessly. When you've fond it just use it in your browser to open the...

@SNA step 1: Change C6 ip address to Static IP 192.168.1.254 to be with in subset of the mail router (192.168.1.1) using LAN option: step 2: Go to C6 system parameter, enable WDS and survey the wifi...

@FXV300 Try setting channel width at 40MHz.

@wxnzks There's no option to use AX50 as a wireless repeater. The two available options you have are to use it as a wireless router or as an access point connected by cable to other router.

@SNA By browsing your main router DHCP client list, you can determine what's the IP address of the Archer C6: Login in C6 interface and set its IP address to be Static IP, so it won't change on the...

@elbik I would suggest you to configure A6 in AP mode (Case 1) and leave only the main router to be a DHCP server. (Archer A6 DHCP server OFF). The connection betwee the devices is: Main router LAN...