@Brejkax WDS should be configured only on the extended router. You main router don't have to be re-configured - here's the guide.

@bigkenny1a Your main benefit from using AX50s in AP mode (Case 1) is avoiding double NAT in your network. If you set AX50s in router mode the communication between devices connected to different...

@KYash When using WDS feature that's a normal behaviour - that's becasue the device WAN (Internet) port is unplugged (as seen from your screenshot). You can always update the device FW manually -...

@User5664 Yes, that's definatelly a double NAT. If you open in a browser this URL: https://www.whatsmyip.org/ you'll see your public IP address. Call your ISP to be advised on the available options.

@Rick108 Archer A7 v5 supports OneMesh, but OneMesh doesn't support an ethernet backhaul - Q5/A5. In your case an ethernet backhaul for a mesh network can be used by a Deco system. As for the same...

@User5664 If the IP address in question is in these ranges: 10.0.0.0 – 10.255.255.255 172.16.0.0 – 172.31.255.255 192.168.0.0 – 192.168.255.255 100.64.0.0 - 100.127.255.255 then my hypotesis is...