@RKArcher Try to change the 5GHz wireless channel on your host router to band 1, which is 36/42/44, then reboot both devices to see if the WDS feature for 5 GHz will be enbabled. By the way, your FW...

@vazquezjm Sounds reasonable. Here you can find a comparison between those two - https://techprojournal.com/tp-link-re650-vs-tp-link-re450/

That's a common situation with this model. Make sure you've put the device in a well ventilated place and on a firm surface. You can even use some spacers to lift it up above the surface - that would...

@vazquezjm Sounds perfectly fine to me. That way you'll get a reliable connection to the second floor just adding an additional A7 as an AP. RE works pretty much the way you mentioned. I would prefer...

@vazquezjm Option 1 would be cheaper, because you can buy some RE or PA to establish OneMesh with A7 according to your infrastructure. Option 2 is entirely different system - it's more expensive. The...

@VrHuilu Make sure your wireless security settings are the same as they were in router mode for all bands.. This is also valid for the wireless password you are using. If that persists you may have...