@Pugs UPDATE: They are now connected, issue was that the edgerouter had to have a PVID 1added instead of previoulsy being tagged (VLAN 1). What has happened with the new software that has changed...

Ok, so upgraded my OC200 to SDN compatibility, followed instructions, upgraded 225/245 V3 with a manual firmware SDN version, configured and upgraded but now both EAPs are disconnented and cant get...

@R1D2 Still no luck with this. I'm wondering if the VLANs also require to be setup in the T2600 under L3 features-interface-interface config-Add, then add static IP mode to all of the VLANs that have...

Thanks @R1D2, I had that already setup. Also, tried different firewall rules, disabled etc but still the same. No matter what as soon as those ports 3 & 4 are taken out of VLAN1 it stops working....

@R1D2 Yeah, just removed one of the two aforementioned IoT devices from VLAN1, it stopped communicating to the NAS. I also then put it back in but blocked it at the firewall (removed from an 'allowed...

@R1D2 what's on ports 3 & 4? The LAG to the NAS? Nope 3 & 4 is to an AVR & Smart TV on VLAN 10 IoT. NAS is on LAG 1 (Ports 15 & 16) I was wondering about the firewall rule (ports 50001 and ? Is it...