Hello @robdavis967 you may try the steps below: 1. Physical connection: CPE510 -------(PoE port) provided PoE adapter (LAN port) -------- PC 2. Ensure the Power LED is solid on, LAN LED is flashing a...

@GRSmith00 This example instruction below may help, you may need a R600VPN router & a L2+/L3 switch. https://www.tp-link.com/en/support/faq/887/

@Rob_CTL Maybe it's firewall issue on the PC, you may disable the firewall settings on the PC to have a try. Good Luck!

@PAT281 Not so familiar with SNMP, mayby the configuration guide from TP-Link website could help. https://www.tp-link.com/en/configuration-guides/configuring_snmp_rmon/?configurationId=18105...

@Gamja Hello, Router tp link er6020 Switch cisco sg220-26 Ap cisco wap150 Router creat vlan id 25 port 5 untag Switch add vlan id 25 Ap vlan id 25 added Ssid guest But Ip not assigned how about the...

@Mijael03 Sorry I cannot understand your language...trying to understand it after google translate here. If your adapters only support 2.4G, then you can only connect to 2.4G wifi network. To connect...