dpsguardLV2Offline
Following: 0Followers: 0
Forums/ WiFi
2020-12-18 23:20:21
Re:EAP245 not allowing all channels and when set to auto all devices using the same 5g channel
@AndreMartins Channel 155 only means that it is a 80MHz wide channel comprising of 149 to 161. https://en.wikipedia.org/wiki/List_of_WLAN_channels Availability of frequencies depends upon the country...
0HELPFULS
Forums/ WiFi
2020-12-18 00:58:17
How does the coverage pattern look like for EAP225 when mounted at 35 feet?
Hello Community, Imagine a scenario where I have more than 30 APs, each about 60 feet average part, mounted at about 35 ft high (ceiling is 40 feet and the APs will be lowered 5 to 6 feet) and 5GHz...
0HELPFULS
Forums/ Controllers
2020-12-18 00:40:52
Band Steering Configuration Parameters on SDN Controller
Hello Community, Hopefully many of you may have set up band steering function on the EAPs managed by SDN controller to help better utilization of 5GHz SSID. There are couple of parameters that I need...
0HELPFULS
Forums/ WiFi
2020-12-17 23:33:12
Re:EAP245 not allowing all channels and when set to auto all devices using the same 5g channel
@AndreMartins I believe you meant to say that Channel number 165 does not allow you to use 40 or 80MHz wide frequency band. This channel only support 20MHz as per North American specifications. If...
0HELPFULS
Forums/ Controllers
2020-11-05 22:01:23
Re:Post-Omada Upgrade: Wifi Clients Unable to Connect to Internet with VLANs Enabled
" port profile has PVID 1 with 1,2,3,5 untagged " Did you meant to say that you have PVID ( untagged / native VLAN) 1 with 2,3,4,5 tagged? The management IP address of the AP needs to be untagged (it...
1HELPFULS
Forums/ Controllers
2020-11-05 21:24:18
Re:What's the relationship with Ubiquiti and the Unifi Controller?
I believe it is quite possible that the same company in India developed the GUI for both products. TP-Link logic will be that if the code behind is different, then look and feel can be copied just...
0HELPFULS
1456...