Forums/
WiFi
2020-03-09 22:58:42
@ R1D2 Finally I could make it work correctly. According to the previous graph, port 6 is a “trunk” with all vlans sent to the CRS326 switch. Switch port 1 to 10 untagged LAN10 port11 to 20 untagged...
0HELPFULS
Forums/
WiFi
2020-01-08 01:59:04
@BruMa Make a diagram to make me understand. concept: any eap in any subnet has to emit all ranges of wifi. I think the problem may be in firewall or ports of the RB3011. When I set up any EAP on the...
0HELPFULS
Forums/
WiFi
2020-01-03 14:30:29
@R1D2 HI I'm back after some tests. ---------------------------------------------- I set: LAN10 (office) 10.10.0.1/16 (DHCP 10.10.0.10 - 10.10.255.200) LAN20 (Students) 10.20.0.1/16 (DHCP 10.20.0.10...
0HELPFULS
Forums/
WiFi
2019-10-29 19:54:38
@R1D2 Thank you very much, I have seen that you put some questions, yet you have answered very complete, when I have free time and equipment availability, I will perform the tests you say. sorry for...
0HELPFULS
Forums/
WiFi
2019-10-29 14:15:21
Hello, I have the following query, because it is confusing all this vlan with the EAP. I have 3 different networks in my network. for example: LAN Offices 10.10.10.1/24 + (vlan20; vlan30) LAN...
0HELPFULS
Forums/
WiFi
2019-10-29 13:55:12
Hello, I have the following query, because it is confusing all this vlan with the EAP. I have 3 different networks in my network. for example: LAN Offices 10.10.10.1/24 + (vlan20; vlan30) LAN...
0HELPFULS