Hi @PBGBBB2020, Glad to hear things are looking up! "So it looks like it was the BW causing the problem." Generally speaking, you should always use 20MHz only for 2.4GHz because the spectrum is so...

Hi @mackworth, I have two EAP225-OD's myself, both connected via MESH for outdoor signal in my yard. I have found the transmit distance of the EAP225-OD is not terribly far and it will not penetrate...

Hi @Egis, Using a variety of internet speed tests (I have Gigabit FIOS -- FTTH) such as Ookla SpeedTest, SpeedSmart, and Fast.com, I routinely see application-level speeds of 350-550 Mbit/sec DL & UL...

Hi @PBGBBB2020, I easily get over 350 Mbit/s DL & UL from my EAP225V3 & EAP245V3 on the 5.8GHz band (I have gigabit FIOS). Some things to check: 1) Make sure band steering is OFF. Use separate SSID's...

Hi @cTsitouridis, Also, be sure all your firmware are up to date. This should be version 5.0 for the EAP225 & 245 (in the USA at least). OC200 firmware is 4.2.8 I have seen some weird bugs when "Low"...

Hi @cTsitouridis, I think you mean the EAP245? V3? Are your two EAP's wired separately? Patch panel, to midspan injector, to EAP? How is the signal level on the EAP225? Is this also V3? Generally...