Hi @DT2748, Power line kits do make a lot of noise on the AC circuit. It's possible some devices are more succeptable to this interference. Some electronics such as this also create RF interference,...

Hi @Blamm, We're starting to see a fair number of these issues on the board. Not sure why. You might try logging in directly to the AP management url. Update the firmware to the latest. Then reset...

Hi @RH_Fiji, 2.4GHz radios should be set to 20MHz BW (not 40, and not 20/40) and should be set to separate channels, 1, 6, and 11. For 5.8GHz, what is your broadband connection -- DL & UL speeds?...

Hi @RH_Fiji, Yes, each AP / router device will have settings for transmit power, radio BW, channel, etc. You''ll need to adjust them all. Depending on AP placememt, RF radiation pattern, and...

Hi @mgmamac, Are you referring to the 110-Outdoor? I though there used to be a 110 indoor, too, but I don't see it on TP-Link's website. The CP210 would probably work fine connecting to the...

Sorry, I didn't mean to suggest that the 225 & 245 series would be discontinued (even though the 245 series has always seemed a bit neglected) Rather, I meant that given the many years and hardware...