@Cloudbuster In my experience there is a small decrease in speed when using mesh but you should still be getting your full 110mbps quite comfortably.

@Cloudbuster Yes mesh requires a controller to work, either running on a PC or via the OC200. Yes, the setup would be as you describe. At least one EAP connected via ethernet to the network to act as...

@lf.PUC Maybe on the left panel of management page, select 'NAT' current hardware nat status > disable I think TP-link have changed the menus in router management since I last used one :(

@lf.PUC Have you tried to disable NAT acceleration on the C5? Advanced settings > lan > Switch control > NAT acceleration > Disable menus may be a little different

@Guy-26 maybe take your DHCP upper limit down to .250. I think when the EAP reset they try to connect on .254 before changing to either the reserved ip or the static. Maybe there is some conflict.

@R1D2 So for the first time since owning a smart phone my wife has actually done the latest ios update! I therefore don't have any devices on the older version to test. Her iphone 8 on ios 12.4.1 is...