Transmission power cannot be increased since this is an 1.1(EU) model that is hardware-locked Tx to 17dBm (not to mention that going beyond that it would be illegal anyway)

baldog wrote How would i select/change the MCS? Here's how to change MCS rates. Be wary that you have to do so for BOTH the AP and the client CPEs. Here's why you should play around with it according...

Replacement units exhibit exact same symptoms. So i take it this is normal behaviour since it doesn't seem to affect the actual throughput. I enclose a link showcasing the issue during an active...

You really should be able to access both the WebUIs from one site, then start the server on any CPE of the two, switch the tab / window to the other CPE 'i.e. the client' specify the previous CPEs IP...

Try reducing your MCS rate from 15 to 12 you'll probably manage 1-2dB more

So I moved the (EU) client literaly opposite the non(EU) AP and managed to get a theoretically maxed out -i.e. 300mbps- connection. Will conduct further tests and report back in due time.