JonathanSK wrote I'm going to set it to a static IP. Reserve that IP on the Router. Test. And then setup the Client by setting it to a static IP, reserving it on the router, and also locking it to...

Boriy wrote Did you mean, that since it's far away it might have some loses in energy when using PoE ? Sure. 802.3af defines a 15.4 W power budget with a loss over 100m of 2.45 W, this yields 12.95 W...

JonathanSK wrote What I am experiencing is packet loss direectly connected to the switch when I connect the AP to the same switch. And I don't know if packet loss is the right term. Ah, I see. Yes,...

JonathanSK wrote and when I logged into the Pharos UI to check the Device was set to have a Static IP from the WAN Why an IP from the WAN? It must be set to an IP from the LAN. In AP mode, DHCP is...

faajr wrote Can you ping the EAPs and the controller? Yes, unless that situation happens. If EAPs suddenly disappear from the network and can't be pinged anymore, there is an issue with the network,...

joeri1 wrote Devices switch between 5Ghz and 2.4Ghz depending on the signal strenght. That's 100% correct. Please let me add that client devices might also take SNR, interferences and negotiated WiFi...