srmarkovic wrote I use bandwith control Im curious on this one, with what you do bandwith control, cause if with stock firmware, it sucks

Advise, do not bring down 5210s from tower until you deploy 510s they can work side by side cause they are on a dif. freq. And before any settings done, update to latest FW here...

stupidbird wrote If one of the two works, please share the result with us. Yes, both will work. but with #2 you will be doing double NAT on the Network, as posted on #13

Any ip you set between 50&254 it's wrong, cause you are in DHCP pool of ISP router set ips in this range 2 to 49 any Numbers you like beteeen those

rui tavares wrote I followed your advice and set up my daughters device to client with DHCP enabled. Didn´t help. Client mode is with DHCP disable

Location 1, on same subnet as isp router, different ip, out of dhcp pool, start with ch. 153, set AP mode, MAXTream disable Location 2 too on same subnet, different ip and out of dhcp pool, same...