Forums/
DSL Modem&Routers
2015-05-04 15:06:15
What's the IP address of the device which you are trying to open port for? Ensure its IP address is assigned by TD-W8968. If you didn't change IP address of W8968, it should be 192.168.1.*.
0HELPFULS
Forums/
DSL Modem&Routers
2015-05-04 14:37:09
Who is your ISP? Your connection type is PPPoE or PPPoA? If you use TD-8816 as a modem router, when you configure TD-W8970 in wireless router mode, the WAN connection type should be dynamic IP....
0HELPFULS
Forums/
Wi-Fi Routers
2015-04-30 15:11:42
It will work because there are three LAN ports for you to connect other devices although you have connected the main router to one of its LAN ports.
0HELPFULS
Forums/
Access Points
2015-04-30 15:05:05
You shoulde use 40MHz as channel width. The network is secured with WPA2-PSK, AES? Did you change any other settings? Can you reset it to factory defaults and check the Max Tx Rate?
0HELPFULS
Forums/
Range Extenders
2015-04-30 14:50:29
WA830RE is working as an access point or range extender? What's the firmware version of your WA830RE? Can you describe the problem in details?
0HELPFULS
Forums/
Range Extenders
2015-04-30 14:43:40
Unfortunately, it has no access point mode, range extender mode ONLY.
0HELPFULS