@xperiments When the load balance is disabled, the data packets will pass through WAN1 and WAN2 randomly. When the load balance is enabled, the router will decide which WAN entry the data packets...

@4uba On Omada Controller, one SSID can only set up one VLAN ID. If you want to differentiate the clients, you may need to create more than one SSID with a related VLAN ID, or just set up a different...

@Tate321 The normal connection is modem---router--switch--devices. You can connect the device to the router directly, and the switch connecting to the router at the same time. (modem--router--devices...

@Luds It seems that this article "What to do if you want to access the Internet with the local gateway rather than the PPTP/L2TP VPN Server?" will help you....

@fishbone222 Hi there, do you mean if you connect the TL-SG2210P to the UL-Swicth with an ethernet cable, the LED light on the port of SG2210P is not lit up, and no any transmission between the two...

@akp55 Go to Device--Click on one of your device, then go to "Config--IP Setting", then you can see the page for you to set up a static IP address.