@kirazai05 Currently, we can only see the Voucher expiration time on the Controller, as a Client, they are not able to see this info. You may feed back this need to TP-Link and they can fix it.

@aubey I see that your Switch supports PoE+ IEEE 802.3at/af and 26 V Passive PoE. EAP225-Outdoor supports 802.3af PoE or 24 V Passive PoE (+4,5 pins; -7,8 pins). EAP245 supports 802.3af/at PoE or 48V...

@SteveiG Do you mean no matter which port that the EAP is connecting to, EAP will be unstable? Or just happens when EAP on port 3? Have you observed the LED? When the status on the port 3 went gray,...

@airfibre Just make sure there is a clear line of sight, and CPE210: 0~5km CPE510: 0~15km+ You may refer to this FAQ: Long distance wireless connection concerns when using outdoor access point

@MMajcica Well, you can try to set this. 1. Make the EAP's port can only learn one MAC(EAP's MAC), Learn Address Mode to permanent, Status set to drop. (You can click the "?" mark in the upper right...

@immec I agree with 1207. By the way, Mesh have to be configured on Controller(software or hardware). Some related documents here, hope it's helpful: Frequently Asked Questions about EAP Mesh Network...