Hi mates, after today's upgrade firmware of Router TL-R605 which solves our hands, exists a problem for many days. Here is my topology As you can see SDN Router (TL-R605) is behind NAT device/ISP...

@xperiments Or if you want to use IKEv2, VPN connecion should work like this: Building A configuration Building B Configuration

When I configure PoE schedule on a port in a specific time, this port is enable for this specific time. I think there is a mismatch about this: It happens the opposite

Hello, I have mention some issues about obtaining new network IP changes from hardware controller. 1st case I have the following topology The default LAN is 192.168.0.0/24. Then click save. Once I...

@xperiments I finally succeeded. I created a 2nd VPN Policy in Building A by setting LAN2 as the remote subnet, ie the LAN of the 2nd floor of Building B (192.168.103.0/24). The 1st VPN Policy has...

I did it from yesterday, alongside with the post on community.