@telefonbauPETER It sound as though the device is in a boot loop, only ever seen that once Try doing the reset anyways, while powered on hold the reset button for around 10 seconds and see if that...

@Nek Hey again That's what I had suspected was the case! As the old v1 device now doesn't have a controller to talk to they will just continue to use the last config they were given, namely the old...

@telefonbauPETER Certainly, resetting sounds like your best option With the device powered on, press and hold the RESET button for about 5 seconds until the LED flashes red/green/yellow alternatively...

@telefonbauPETER Hello and welcome It does sound like the device has hung up on you, did you try scanning the LAN to see if its got a new or different IP? (it shouldn't but worth a try). Your best...

@MrTheJim You can control the joining of A/B/G clients to the wifi via the controller under the SSID settings (screen below). Disabling CCK rates will stop any B grade devices connecting, however it...

@MrTheJim What setting are you referring too that are missing from the controller? is there something specific Would you have any more details or diagnosis from your side you could provide us to help...