@eriklanden Hey No sadly not, its specific technology for IP Cameras Basically it turns the network speed down to 10mbps in an attempt to favor distance and stability over speed. While 10mbps is...

@bart40 Evening Glad you got it setup and working so far, it can be fun to play with! In answer to your questions.. Yes, we are due a few firmware updates soon, if memory serves right one was pulled...

@Benje Hey This should work fine for you. Ideally, I would recommend that if possible the AP was connected to the switch, rather than the router. However it cant see it affecting you in any way I...

@nu1mlock Hey Roaming (quick roaming and standard roaming) requires a controller to facilitate the handover from AP to AP. However as you using an EAP245v3 indoors and a MR600 outdoors, these two...

@Simpuhl That should work OK for you but few things you need to do 1. Change the Deco from Router to AP mode so it uses the Wired Backhaul and not the wireless 2. Connect the first switch to your...

@PaddyBoyFloyd It could be firmware on the APs Check what firmware you are running on the EAP245s, this should be version 5.0 or higher. You might need to log into this manually (before adopting) to...