@mobile75 Hey Think I follow you ok If you are asking, personally I would keep the new ROUTER on a separate range. Something like 192.168.10.1 Then just allow it to route the data to WAN 1 and WAN 2...

@Dark_Energy Hey I had the exact same problem, turned out it was a setting on the Controller that was pushing out incorrectly (my fault) Under SETTINGS > WIRED NETWORKS there is a LAN pre-set for...

@BTMJ Hey Thats what I am hoping to find out, if you are getting a valid IP when connected to the switch it would indicate this is working ok... else yeah its likely your switch is stuffed. From...

@Nevian900 Hey Nevian Ok see the issue here.. your switch must be a smart switch of some type, its handing out IP addresses.. What model is the switch? If its handing out IP addresses its either a...

@Cyclups Im getting the exact same result on the same router However mine doesnt build up but rather goes straight to ~25% and stays there, with the odd drop during the middle of the night (marked in...

@Nevian900 Hey So you are getting an IP address given to the computer, for your its 192.168.1.100 with your default gateway (internet router) having the address 192.168.1.1 This is all good, if you...