Model : CPE210

Hardware Version : V2

Firmware Version : 20160705-rel52453

ISP : Telekom Austria

Hello,

I like to extend my home network.

Situation now:

Modem -> old Netgear WNR3500 Router (acts as AP and DHCP Server) -> Computer1/Notebooks/Smartphones


Now,I need WLAN in a second house (about 50m away).
It this possible with only one CPE210 at the 2nd House connected to archer c7?

I bought one, buy I can't configure it with the CPE210 connected to a PC... Message: No Internet! I have some Problem with the DHCP.

Tried with: Brige, Repeater and Client.
With Static IP ( Router. 192.168.0.1, CPE210: 192.168.0.254)
With Dynamic IP
Dymapic IP and DHCP Fallback (192.168.0.1 AND/OR 192.168.0.254)

subnet always: 255.255.255.0

CPE210 shows good connection (3 of 4 lights) but nothing happend.... no connection/no IP on end-device


At the End, it shoult look like this:

Modem -> old Netgear WNR3500 Router(AP and DHCP Server) -----------------------------------------> CPE210 -> Archer c7 -> some Wlan Devices

Archer C7 works fine as wlan repeater on Netgear Router Network... should be no problem to change to CPE210 Network
I hope you can help me configure the CPE210 :-(