ER7026+ OC200. Professional products of the lowest quality
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.ER7026+ OC200. Professional products of the lowest quality
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
After 5 hours of trying to make the ER706 and OC200 to work I removed them from my system and installed the old router.
TP-LINK your quality control is a joke.... I configured the ER by using the web interface and tried 3 or 4 times to make it play ball with the OC200.
The router is found and when I click adapt it goes to provisioning and deleted all my LAN settings. So I have all my devices with 192.168.1.x ips. OC200 decides while provisioning to reset the lan to 0.1. Then tries to adopt the router again and fails again and again. Not only that but changed the login and password of the router to something else... I don't know what so I can't localy access the router. So I reset the router and try again.
I tried to adopt the router without make any configuration, again lo luck
The last straw is that it changed or corupted my login and password of my EAP 225 access points too, So I must go and reset each and every one of them to be reconfigured again.
Please tell my that is my fault, that I did something wrong... I have a small network at home so it is only 5 lost hours and 250 lost euros for the devices. I pitty the administrator with 100+ devices installed
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Everything is on the latest firmware and after reset the default account password works ok. I can enter the web interface of omada and the oc200 local interface without any issues, so I know the password for them. I haven't used the controler to change the password on any device.
This is one of my problems, the controler assings a new password to the EAP and router and fails to adopt them. Then I try to manualy adopt tham and I get a invalid login/password.
- Copy Link
- Report Inappropriate Content
@NikosK I know this will sound annoying and unhelpful, but are you sure you followed that guide to the letter? Starting with a fresh oc200 and ER7026? I had the exact same problem as you with having incorrect passwords and then followed the guide and everything worked on my first try.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
i didn't think of this yesterday but there is also this artical that may help.
https://community.tp-link.com/en/business/forum/topic/245838
- Copy Link
- Report Inappropriate Content
Thanks for all the help provided. I removed all the omada devices and I will reset them again and create an ofline network in order to see if I can adopr all the devices normaly. I will post my results.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 36
Replies: 0
Voters 0
No one has voted for it yet.