Home Network Community > 3G/4G Routers/MiFi > [Solution]Manual Band Selection for 4G WiFi Routers
< 3G/4G Routers/MiFi

[Solution]Manual Band Selection for 4G WiFi Routers

123...

[Solution]Manual Band Selection for 4G WiFi Routers

[Solution]Manual Band Selection for 4G WiFi Routers
[Solution]Manual Band Selection for 4G WiFi Routers
2020-12-08 07:11:08 - last edited 2021-09-13 08:59:43

If you have experienced an issue of disconnecting or slowness on the 4G Wi-Fi router’s network due to the auto band selection,  Please download and install the following beta firmware the  router to manually fix the band.

 

Archer MR600(EU)_V1:

https://static.tp-link.com/2020/202012/20201207/Archer_MR600v1_1.1.0_0.9.1_[201204-rel66940]_up_boot_2020-12-04_19.05.35.zip

Note: Please note that not all combinations of the 4G bands are supported in 4G+ mode. Only when the router and the SIM card support the same combinations of 4G band in 4G+ mode, the bands might be aggregated successfully.

 

Archer MR200(EU)_V3/V4, Archer MR400(EU)_V2/V3, TL-MR6400(EU)_V3/V4, TL-MR150(EU)_V1:

https://static.tp-link.com/2020/202007/20200714/LTE_GATEWAYv3_1.11.0_0.9.1_up_boot(200325)_2020-06-12_15.48.55.zip

 

Archer MR400(EU)_V4:

https://static.tp-link.com/beta/2021/202104/20210409/Archer_MR400(EU)v4_1.4.0_0.9.1_[210408-rel33808]_up_boot_all_2021-04-08_09.56.07.zip

 

TL-MR6400(APAC)_V3: 

https://static.tp-link.com/beta/2021/202102/20210201/LTE_GATEWAYv3_1.3.0_0.9.1_up_boot(210129)_2021-02-01_16.25.31_beta.zip

 

TL-MR6400(EU)_V5:

https://static.tp-link.com/2020/202012/20201208/TL-MR6400(EU)v5_1.1.0_0.9.1_[201113-rel63736]_up_boot_all_2020-12-08_09.38.45.zip

 

Archer MR200(EU)_V5:

https://static.tp-link.com/2020/202010/20201012/Archer_MR200(EU)v5_1.0.0_0.9.1_[200925-rel32374]_up_boot_all_2020-09-30_11.15.13.zip

 

TL-MR150(EU)_V2:

https://static.tp-link.com/2020/202011/20201117/TL-MR150(EU)v2_1.1.0_0.9.1_[200930-rel56894]_up_boot_all_2020-09-30_15.53.06.zip

 

*The official firmware has been released for the below models, you can install the latest firmware via the online upgrade or download it from the official website:

TL-MR100(EU)_V1_210119

Archer MR600(EU)_V2_200909 and later versions

TL-MR6500v(EU)_V1_200924 and later versions

 

If you are not sure about how to select the band manually on the router web interface, check the instructions below:

How to select 4G band manually on the web interface of LTE Gateway Routers?

  0      
 
  0      
 
#1
Options
201 Reply
Re:Manual Band Selection for 4G WiFi Routers
2020-12-09 06:13:24

@Kevin_Z  V4  firmware is not there also 

  0  
  0  
#2
Options
Re:Manual Band Selection for 4G WiFi Routers
2020-12-09 07:43:37

@amit.myid 

 

Hi, this is for the MR6400 V4:

  0  
  0  
#3
Options
Re:Manual Band Selection for 4G WiFi Routers
2020-12-09 09:45:12 - last edited 2020-12-09 09:48:16

@Kevin_Z 

  

The firmware for MR600(EU)_V1 in your message is version 1.1.9. But I have already installed version 1.2.0, which is from May 2020 (1.2.0 0.9.1 v0001.0 Build 200511 Rel.44954n).

Why does a new firmware version have a lower version number?

  0  
  0  
#4
Options
Re:Manual Band Selection for 4G WiFi Routers
2020-12-09 10:48:17

@Kevin_Z 

 

Official firmware is abailable for MR600 V1 with band selction ?

  0  
  0  
#5
Options
Re:Manual Band Selection for 4G WiFi Routers
2020-12-09 11:26:19

@Baenz 

 

Hi, the beta firmware version was provided prior to the latest official one, so this band selection is no included in the official yet.

  0  
  0  
#6
Options
Re:Manual Band Selection for 4G WiFi Routers
2020-12-09 16:13:35

@Kevin_Z 

 

hi

 

please provide the firmware also for the MR200(EU) v2.1 to be able switch between 4G bands

  0  
  0  
#7
Options
Re:Manual Band Selection for 4G WiFi Routers
2020-12-10 01:32:12

@Alex_Al3x 

 

I'm afraid we cannot provide you the beta firmware to manually select the band on the MR200(EU) v2.1, sorry.

  0  
  0  
#8
Options
Re:Manual Band Selection for 4G WiFi Routers
2020-12-11 16:20:31

@Kevin_Z is it possible to have the same feature for TL-MR6400(EU)_V1?

  0  
  0  
#9
Options
Re:Manual Band Selection for 4G WiFi Routers
2020-12-12 19:40:39

@Satheskumar 

Satheskumar wrote

@Kevin_Z 

 

Official firmware is abailable for MR600 V1 with band selction ?

Band selection settings made in beta firmware should remain set if you then update to release. Been using it that way for a while now. You'll need to revert to beta to change them of course.

 

This beta fixes the SMS problems so I'll stick with it for now.

  0  
  0  
#11
Options
Re:Manual Band Selection for 4G WiFi Routers
2020-12-16 00:36:04

@JerryAtrick 

 

Since I upgraded to the new beta the router (MR600) has locked up multiple times in two days, only solved by a reboot, so I've reverted to the old beta firmware. I'm beginning to think it's simply unsalvageable. I wish they'd release a stable firmware with band selection, but I won't get my hopes up.

  0  
  0  
#13
Options
123...

Information

Helpful: 0

Views: 227

Replies: 0

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.