OC200 + EAP225 - EAP225Wall - EAP225Outdoor cannot see and print on AirPrint Printer
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Model: OC200
Hardware Version: V1
Firmware Version: 1.7.0 Build 20200703 Rel.59609
5 x EAP225 V3
2 x EAP225Outdoor V1
1 x EAP225Wall V2
The old system (Controller AC50 + CAP300) could see and print on AirPrint Printer from MacOSX and iOS.
The new system (Controller OC200 + EAP225) can not
Any thoughts?
Thank you for your time!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Dear @RicBa,
Do you mean that the wireless devices connected to the EAP's WiFi cannot see the printer?
How do you connect the AirPrint Printer, by WiFi to the EAP or by cable to your main network?
Please check the info below for troubleshooting.
1. Check the IP address obtained on the printer, verify the AirPrint Printer is in the same network with EAPs.
2. Use the Ping command to check the connectivity between the printer and your device.
3. Confirm if you have Guest Network enabled for the EAP wireless network. If yes, please disable Guest Network to have a try.
Kindly note that SSID with the guest network will block clients from reaching any private IP subnet.
Best Regards!
- Copy Link
- Report Inappropriate Content
Dear Fae,
Do you mean that the wireless devices connected to the EAP's WiFi cannot see the printer?
Yes I do. Only Apple devices using AirPrint Protocol cannot see the printers ( HP and Brother), Windows devices can see and print.
How do you connect the AirPrint Printer, by WiFi to the EAP or by cable to your main network?
The printers are connected by WiFi 2.4 Ghz.
1. Check the IP address obtained on the printer, verify the AirPrint Printer is in the same network with EAPs.
Yes, they are.
2. Use the Ping command to check the connectivity between the printer and your device.
Ping runs OK
3. Confirm if you have Guest Network enabled for the EAP wireless network. If yes, please disable Guest Network to have a try.
Guest Network disable.
Thanks
- Copy Link
- Report Inappropriate Content
Dear @RicBa,
Thank you for the update.
Only Apple devices using AirPrint Protocol cannot see the printers ( HP and Brother), Windows devices can see and print.
It seems to be an issue between AirPrint and HP/Brother printers, you may contact the manufacturer of the printers for further suggestions.
For your reference, try Bing or Google the issue "AirPrint Protocol cannot see the printers ( HP and Brother)", you could also get some suggestions shared on the Internet.
Best Regards!
- Copy Link
- Report Inappropriate Content
Dear @RicBa,
Sorry for the ill-considered suggestions in my last reply. I'm wondering if the issue has been resolved?
Our senior engineers helped to run some tests with the printer Canon IP7280 and Canon MX922 in the lab, but failed to reproduce the problem. After connecting iPhone and printer to either the same EAP or different EAPs, the print on iPhone works without issues.
If you still need any further assistance, please do not hesitate to contact us. We'll be glad to assist you.
- Copy Link
- Report Inappropriate Content
I have the same problem with a Canon TS3100 on a network composed of one EAP225 V3 and EAP225-Outdoor controlled by Omada 4.1.5 on Ubuntu.
I can ping it from my Apple devices but can't print and canon apps can't connect to printer.
windows computer can access printer correctly. It stopped working few months ago. The only change I had when it stoppedmworking is the addition of the Outdoor EAP. But still don't work even if they are on the same AP...
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 13
Replies: 0
Voters 0
No one has voted for it yet.